The SAB car wash is designed to wash trucks arriving at the site. A car wash with treatment facilities and a water recycling system is located in a separate building. Water for washing is consumed from the circulating water supply system. To purify polluted waters generated during vehicle washing, it is planned to install a block-modular water treatment complex. To meet the demand for compressed air, a compressor is installed in a separate room. The building is envisaged as one-two-storey, with dimensions in terms of 14,4x24,0m and a height of 7,5m. At elev. +3,0 m built-in ventilation chamber. The building - II degree of fire resistance. According to the functional fire hazard, the building is class F 5.1. The constructive fire hazard class of the building is C0. The fire safety class of the applied building and finishing materials is K0. The load-bearing structures used have fire resistance limits corresponding to the accepted degree of fire resistance of the building. The frame of the building is steel, lined with fire-resistant gypsum plasterboard, with the use of fireproof mineral wool. Wall railings - from sandwich panels of the company "TRIMO" on a steel frame. Socle - foam concrete blocks, lined with concrete tiles "under natural stone". Washing for trucks - a one-two-story building made of wall sandwich panels from the company "TRIMO", color "ivory" (according to the RAL 1015 catalog). The basement of the building is made of foam concrete blocks. Facing of the portal and plinth with concrete tiles "under natural stone" of the company "RAMROCK" "fantastic city" in light tone color (according to catalog 02650). PVC window units - white profile, with double glazing made of transparent polished glass M-1, 4 mm thick. Finishing of internal walls. Internal walls and partitions are plastered and painted. The bottom of the walls or partitions is lined with ceramic tiles up to ~3m mark. Finishing of ceilings. In the washing and wastewater treatment rooms, the ceilings are made of coated profiled steel sheet (prefabricated). In other rooms, paint the ceilings with water-based and silicate paints in light colors. Floors. The floors of the premises are a mosaic concrete floor over the underlying concrete layer. The building is one-two-storey, with dimensions in terms of 14,4x24m, with a height of 6.00 at the bottom of the roof runs. At around 3.00 in the axes G-D, 4-5 built-in ventilation chamber. The frame of the building is steel, the pitch of the columns along the axes A, B, D is 6 meters, between the axes A-B 8 meters, between the axes B-D 6,4 meters. The stability of the building is ensured by vertical connections along the axes A, 1-2; A, 4-5; G, 1-2; G, 4-5, horizontal ties along the roof and frame nodes at the junction of the columns to the roof runs along the axes 1, A-B; 5, A-B The foundations are reinforced concrete columnar on a pile foundation. Bored piles Ø 400 mm, 16-18 meters long. In the building in axes B-C, 2-3 there are reinforced concrete pits with a bottom mark of the bottom slab -1.80, -2.90, and in the washing department in axes A-B, 1-5 - a system of channels for washing drains. Overlap in axes V-D, 4-5 - a monolithic reinforced concrete slab along metal beams. Covering - steel profiled flooring on metal beams. The walls are made of “Sandwich” type panels by TRIMO. Socle - foam concrete blocks, lined with concrete tiles under the "natural stone". Gate - steel lifting sectional.