Architectural and space-planning solutions

Fire-technical classification: Level of responsibility of the building - II (normal); Category for fire and explosion hazard - D. Degree of fire resistance - II. Functional fire hazard class - F 5.1. Constructive fire hazard class - C0. The building of the parking garage has a rectangular shape in plan. Dimensions between axles 1-3 - 33,07 m, A-B - 11,540 m. The building is one-storey with a maximum elevation of +5,100m along the parapet. The height of the floor to the floor slabs is 3,950 m. Zoning has been completed in the building. The entire volume of the building can be divided into two groups: 1. Parking lot for 8 cars. Vehicles enter from the street through sectional gates on the facade of the building. The gate is made with a gate. 2. Garage with washing rooms, with water purification room; the premises of those service; pantry of spare parts and accessories; household area. The living area includes an entrance group - an entrance vestibule, a corridor, a rest room for drivers, a mechanic's room, a lavatory with a shower. Through the vestibule, the residential area is connected to the parking lot. The room for storing, cleaning and drying cleaning equipment has an area of ​​2,96 m2 and is equipped with hot and cold water supply. The required area for this room is 0,8 * 369,56 / 100) = 2,95 m². The evacuation of people from the building is solved by a wide corridor leading through the vestibule to the street, as well as by the presence of gates 800 mm wide at all gates. The building is frameless with load-bearing walls and horizontal elements (ribbed roof slabs). The walls of the building and partitions are made of silicate brick according to GOST 379-95 on mortar M50. Overlapping - combined from ribbed plates of a covering of a series 1.465-3. The roof is flat with an organized external drainage system. The roof was insulated and the roof covering was replaced - welded roll material in 2 layers "Bikrost" - 6 mm. Lintels - prefabricated reinforced concrete according to GOST 948-84. Windows - PVC according to GOST 23166-99. Doors: external - PVC insulated. - internal - PVC. - gate - lifting sectional. Windows and doors accept customized manufacturing. Along the perimeter of the building, a blind area 1,0 m wide made of B15 concrete, reinforced with a 4ВрI mesh with a rod spacing of 100x100 mm, is provided on a compacted gravel-sand base. b) justification of the adopted volumetric and architectural and artistic decisions, including in terms of compliance with the limiting parameters of the permitted construction of a capital construction object. The building at the construction site has a simple geometric shape in plan, providing a minimum area of ​​external enclosing structures. Space-planning decisions of the building, geometrical parameters are adopted on the basis of the current regulatory documents and technological processes taking place in it. The architectural expressiveness is emphasized by the color scheme of the facade. c) description and justification of the compositional techniques used in the design of facades and interiors of the capital construction object. The facade of the designed building is made in a single color scheme and is in harmony with other buildings on the construction site. In the decoration, plastering and leveling of the surface of the brickwork, putty, followed by painting with acrylic paints are used. The finishing materials used are of exceptionally high quality, ensuring long-term operation without repair. Interior solutions meet modern requirements. Interior decoration of walls, ceilings and floors is carried out using modern high-quality materials. The interiors correspond to the functional purpose of the premises. d) description of solutions for finishing the premises of the main, auxiliary, service and technical purposes. Interior decoration of the floor. Residential area - vestibule, corridor, driver's and mechanic's premises, vestibule-lock: - walls - improved plaster, putty, painting with water-dispersion paint; - ceilings - sheathing with moisture-resistant gypsum board (on a metal frame) GKLV "Knauf", putty, painting with water-dispersion paint. There is a suspended ceiling of the Armstrong system along the corridor. - floor covering - ceramic granite tiles with glue. Living area - lavatory with shower: - walls - plaster, full height ceramic tiles; - ceilings - suspended rack ceiling "Albes"; - floor covering - ceramic tiles on cement. sand solution. The mechanic's room has a self-leveling polymer floor based on synthetic resins. Garage with washing rooms, with water purification room; maintenance room; pantry of spare parts and components: walls - improved plaster, putty, painting with water-dispersion paint; ceilings - putty, painting with water-dispersion paint; floor covering - self-leveling polymer floor based on synthetic resins. All premises with a permanent stay of people have natural lighting that meets sanitary standards and rules. This is achieved by installing wide, bright windows in these rooms, as well as the accepted geometric parameters of the building, the layout of the premises and the very location of the building on the site. Noise levels from the equipment installed in this building do not exceed the permissible level. The floor coverings used in this project, the material of the walls and partitions ensure the protection of the premises from noise.