General information.

The project presents design and estimate documentation for the overhaul of the building of a kindergarten, a municipal preschool educational institution, the building is a 2-storey, with a semi-passage technical underground, a separate building, with load-bearing external and internal walls made of solid ceramic bricks; ceilings along load-bearing walls, with precast concrete floor slabs; the roof is flat, unexploited with an external drain with soft roofing. Partitions made of brick and plaster blocks. Windows from wooden profiles - original according to the year of construction, wooden doors - original according to the year of construction. Construction class - II. Degree of fire resistance - II. Building class for functional fire safety F 1.1. The project provides for the use of this building for its functional purpose - a kindergarten for 40 children (age from 2 to 7 years) and 15 staff members, with sleeping and play areas, a multi-purpose hall, entrance groups, recreation, laundry, food and medical blocks, technical rooms , rooms for staff and sanitary facilities, including for people with limited mobility, based on modern building, fire and sanitary and hygienic standards. The project provides for the following types of work: complete dismantling of existing partitions; dismantling of the existing roofing; cleaning all facades from dust and dismantling the fire ladder on the roof; cleaning of all internal walls from the old plaster layer; complete dismantling of all windows with window sills and ebbs, doors, stained-glass windows; complete dismantling of the porches of the entrance groups, dismantling of 3 platforms of the entrance groups; complete dismantling of all floors; erection of internal partitions from hydrophobic aerated concrete blocks of thickness . -100,150,200mm; from a corpulent clay brick of thicknesses. -120 mm; device for insulating the floor of the 2nd floor /flat roof/, with the device for roofing and parapet covers; installation of an evacuation steel staircase from the 2nd floor; arrangement of a ramp for MGN at the entrance to the medical unit; installation of floors in all rooms; installation of suspended and false ceilings in the premises of bathrooms, entrance groups, corridors, catering department, medical unit, universal hall, staff rooms, locker rooms; cleaning, leveling, filling and painting ceilings in all other rooms; installation of floors made of porcelain stoneware, wear-resistant linoleum, laminate; facade finishing: insulation min. cotton slabs -150, 200 mm; installation of ventilation facades from metal cassettes, with plinth facing with clinker facing bricks; arrangement of the bases of the porch platforms under the cladding with clinker tiles; arrangement of new entrance warm vestibules - entrance groups; filling window openings with windows made of plastic profiles with 2-chamber double-glazed windows; installation of wooden window sills; finishing of internal surfaces of walls and partitions (plastering, preparation for painting, painting for 2 times, etc. (see Finishing List); filling doorways with steel and composite doors, installation of external and internal stained-glass windows from aluminum structures with filling with 2 and 1-chamber double-glazed windows. For a mark of 0.000, the mark of the clean floor of the 1st floor was taken; elev. clean floor of the 2nd floor +3.300. The height of the premises in cleanliness: in the technical underground 1700 mm., in the water metering unit and indoors switchboard 2150 mm. The height of the premises of the 1st floor in cleanliness: in the main premises - 2750, 3000 mm., in the bathrooms and entrance groups - 2750 mm. Room height 2nd fl. in cleanliness: main premises - 2780, 3040 mm. After installation of all engineering communications, close the gaps at the points of passage through partitions, walls and ceilings. Plaster all exposed surfaces of metal structures on a metal mesh with a layer of 30 mm. Parapets of all roofs, all joints of pipes and decorative elements to the roof should be protected with ebbs and aprons made of metal, sheet, joints of ebbs and aprons with a finishing layer should be treated with sealant. The ebbs of all decorative cornices, windows should be made of metal. sheet joints of ebbs with otd. treat with a layer of sealant, specify the type of metal in the installation project. Mounting drawings of windows, doors, stained-glass windows to be agreed with the designer.