architectural solutions. Space-planning solutions

The object of temporary construction is a single-level contactless car wash with dimensions in the axes of 13,8 m by 7 m. Roof: flat trapezoidal, hot-dip galvanized steel, powder-coated white, with a slope of 1,5%. The self-service car wash building has a rectangular shape with a height mark of 4.29 m (elevation of the advertising banner). The height in the technical room is 3 m. The maximum operating height of the self-service car wash station is 3,50 m. shelving with connection of a water correction station, a washing station and a two-speed heater), a container for technical personnel.

Constructive decisions

The project adopted a monolithic slab foundation made of concrete B 22.5, M 6, P150, arranged on a densely packed sand and gravel base. For the relative mark of ± 0.000, the mark of the top of the reinforced concrete slab was taken. Waterproofing - vertical (all surfaces in contact with the ground - coating with liquid penetron or hot bitumen for 2 times). Backfill the sinuses of the pit with medium-grained sand, followed by trombling with a coefficient. compaction Ku = 0.95 (from natural density). Reinforcement of the foundation slab and slabs is carried out with meshes of individual reinforcing bars 0 12, 16 A-Sh with a step of 150 mm, in both directions. Grids are installed in the upper and lower zones of the foundation slab. Reinforcing bars are combined into a mesh using a knitting wire. The overlap of reinforcing bars should be performed in a run-up with a long overlap of at least 34 0 of the reinforcing bar. The production of formwork, reinforcement and concrete work is carried out in accordance with the requirements of SNiP 3. 03. 01-87. The production of earthwork and concrete work in the winter period is carried out in accordance with the requirements of SNiP 3. 03. 01-87, taking into account the following requirements: exclude freezing of the soil by carrying out work stopovers (one entry is equal to one shift), after which cover the place of work with a layer of insulation (insulating fills or mats). up to air temperature = -10° С, concreting should be done with concrete with antifreeze additives and electric heating should be carried out. Backfilling should be carried out with compacted sand and poured with water every 300 mm.

Drawing set

Drawings with specifications for the following structures and parts of a self-service car wash for 2 container-type posts: foundation, ground floor, pillars and attic, roof structures, sections A-A, B-B, C-C, facades, water supply, sewerage and drainage, heating , septic tank, ventilation, power supply, switchboard.