Constructive decisions.

Structures of a frame-panel building: Socle, hinged-self-supporting, external (facade) panels - reinforced concrete, three-layer wall panels (produced by the plant Concrete goods, TU 5831-002-20919449-2015); inner layer, reinforced concrete thickness. 100 mm, reinforced with frames and individual rods with class A500 reinforcement, heat-insulating layer, 150 mm thick, made of hydrophobized boards "Beltepfasad T" with a density of 100 kg/mXNUMX, facing layer, reinforced concrete thickness. 80 mm, reinforced with a mesh of individual rebars of class A500. The total wall thickness is 330 mm. Concrete class B25, F150, W4. Columns - section 400x400mm and 500x500mm; according to series 1.020 - 87 "Frame structures of interspecific use for multi-storey public buildings, industrial buildings and auxiliary buildings of industrial enterprises" with allowable changes. Crossbars - section made of concrete class. B30.W4.F75, grade RDP 6.56-7,5 At-Y. And RLP 6.56-7,5 AT-Y. Overlapping - hollow slabs with a height of h = 265 mm, manufactured by the reinforced concrete plant, TU 5842-001-20919449-2015. Internal walls of the first and second floors - prefabricated reinforced concrete, single-layer solid section panels 180 - 220 mm thick, concrete class VZO, F4 00, W4, reinforced with class A500 reinforcement. (factory production Concrete goods, TU 5832-003-20919449-2015). The panels are separated by a horizontal seam, consist of an upper and lower part, rigidly connected through welding of steel plates to embedded panels. The division of the panel is made for ease of transportation. The strength and stability of the connection are provided.

Roof structures. Roofing on a reinforced concrete slab: vapor barrier CA 500, TECHNOROOF 45 (160mm), TECHNOROOF NZO-CLEAN (development 30 + 270mm), prefabricated screed of 2 layers ACL (20mm), bituminous primer TECHNONICOL No. 01, uniflex VENT EPV (Zmm), TECHNOELAST EKP (4,2mm). The roof is flat combined with an internal drain. The construction of the roof of the sports and assembly hall: Steel trusses, purlins - rolled metal according to calculation, corrugated board 114, vapor barrier - vapor barrier CA 500; insulation - Technoruf H45 (lower layer) (160 mm); insulation - Technoruf NZO-CLEAN (30-*-270mm). Combined screed of 2 layers ACL (20mm), bituminous primer TechnoNIKOL No. 01, uniflex VENT EPV (Zmm), technoelast EKP (4,2mm). Rigidity diaphragm - single-layer panel, reinforced concrete, thickness. 180 mm (according to series 1.020-87). Ladders are prefabricated reinforced concrete, from concrete class. B30, reinforced with rebar class. A500. Parapet - prefabricated, reinforced concrete panels 120 mm thick and high 1000 mm.

Structures of large-panel buildings. Socle, self-supporting, external (facade) panels - reinforced concrete, three-layer wall panels (manufactured by the plant Concrete goods, TU 5831-002-20919449-2015); inner layer, reinforced concrete thickness. 100 mm, reinforced with frames and individual rods with class A500 reinforcement, heat-insulating layer, 150 mm thick, made of hydrophobized boards "Beltepfasad T" with a density of 100 kg/m3, facing layer, reinforced concrete thickness. 80 mm, reinforced with a mesh of individual rebars of class A500. The total wall thickness is 330 mm. Concrete class B25, F150, W4. Socle, load-bearing, external (facade) panels - reinforced concrete, three-layer wall panels (produced by the plant Concrete goods, TU 5831-002-20919449-2015); inner layer, reinforced concrete thickness. 180 mm, reinforced with frames and individual rods with class A500 reinforcement. Theat-insulating layer, 150 mm thick, made of hydrophobized boards "Beltepfasad T" with a density of 100 kg/mXNUMX, facing layer, reinforced concrete thickness. 80 mm, reinforced with a mesh of individual rebars of class A500. The total wall thickness is 410 mm. Concrete class B25, F150, W4. Ceiling - hollow slabs h=265 mm high, manufactured by the plant Concrete goods, TU 5842-001-20919449-2015. The internal walls of the first, second and third floors are prefabricated reinforced concrete, single-layer, solid-section panels with a thickness of 180 - 22CLMM,--, concrete class VZO, F100, W4, reinforced with class A500 reinforcement. The vertical edges of reinforced concrete panels have dowels to absorb vertical shear forces and embedded parts for welded joints. Vertical joints are embedded in concrete. The panels are separated by a horizontal seam, consist of an upper and lower part, rigidly connected through welding of steel plates to embedded panels. The division of the panel is made for ease of transportation. The strength and stability of the connection are provided.