Architectural solutions.

Fire station Location of premises by floors 1st floor: at elevation minus 0,300 - parking of fire equipment, washing post, maintenance post with a viewing hole (the height of the premises is 7,18 m); at elevation minus 0,200 - washing technical room (room height - 3,28 m); at elevation minus 0,200 - washing technical room, office of the head of the garage (senior driver), accumulator (room height - 3,5 m); at elevation minus 0,120 - storage of spare parts, workshop (room height - 3,4 m); at el. 0,000 - vestibules, corridors, vestibule, control room of the communication point, dispatcher's rest room, control room, public briefing room, storage, cleaning and drying rooms for cleaning equipment, RPE rooms (checking, drying, washing), room for the senior master of the GDZS, compressor room, room for storage PPE, electrical room, sleeve master room, material storage room, utility room, fire hose rooms (storage, washing, drying), heat metering room, sports equipment storage room, gym, rest room, sauna rooms, ITP, pump room ERW, wardrobe for placing combat clothing, washing combat clothing, drying combat clothing, bathrooms, showers, a warehouse for storing a foam concentrate, a technical room for low-voltage systems (the height of the premises is 3,28 m). 2nd floor: at el. +3,600 - corridors, hall, office, administrative and service offices, bathrooms, showers, storage rooms, cleaning and drying of cleaning equipment, room of the building commandant (foreman of the unit), warehouses for belongings, traffic safety class, descent room to the garage, training class , a wardrobe of clean clothes for personnel, a room for psychological unloading, a technical room for low-voltage systems, an office for the head of the guard, rest rooms for the duty shift, a paramedic with a treatment room, ventilation chambers, a room for cooking and washing dishes, a dining room, a room for washing and drying clothes property. The height of the premises is 3,28 m. 3nd floor: at el. +7,200 - corridors, halls, vestibules, a meeting room with a height of 5,37 m, a storage room, eating rooms, rest rooms, a room for receiving and transmitting communication equipment, rooms for storing, cleaning and drying cleaning equipment, bathrooms, showers, a ventilation chamber. The height of the premises is 3,28 m. Roof: at el. +7,800 - access to the roof, smoke hatches. at el. +11,400 - exits from the stairwell. Vertical metal stairs are provided at the height differences. The vertical connection between the floors of the building is carried out by stairs. Exterior finishing Facades and plinth - hinged ventilated facade system with cladding with cassette-type metal panels. Porch and ramp - porcelain tiles. Protections of porches, a ramp, a roof - galvanized steel. The roof is flat, rolled with an internal drain. Window blocks - in PVC bindings filled with two-chamber double-glazed windows. Stained-glass windows in aluminum bindings filled with double-glazed windows. Doors: external - insulated metal, factory-painted; service and fire-fighting - metal painted in the factory; internal - wooden. Gates - glazed, sectional, insulated, with a gate and an automatic lifting mechanism. A complete interior decoration of the premises is provided in accordance with the technological task and the functional purpose of the premises. Educational and training projectile "Tower with a climbing wall" Accommodation: at el. 0,000; +3,300; +6,600; +9,900-story platforms. Vertical connection is carried out by stairs. Exterior finishing Facades: in axes 1-3, B-A, 3-1 - painting on the prepared surface; in axes A-B-planed wooden board; in axes 3-1 - structural shields of the climbing wall. The roof is flat with an external organized drain. Doors - metal, painted in the factory. Interior finishing Walls, ceiling and floors - polished concrete with impregnation. Rescuers psychological training strip (firing strip) The obstacle strip is 123 m long and consists of projectiles: a ladder over a pit with burning liquid; overpass; basement; labyrinth; well; collector; swing ladder. The ladder above the pit with burning liquid is made of welded metal structures 6,5 m long and 0,9 m wide, with ladders from 2 sides, with enclosing handrails 1 m high. The projectile is located above a concrete pit with dimensions in plan along the outer edges of 6,4x3,2 and a depth of 0,52 m. Overpass - a welded metal structure with an inclined pipe with a length of 11,5 m and a width of 0,7 m having two platforms at different levels. Basement - an underground structure "P"-shaped, 3 m deep. The entrance and exit to the basement has dimensions of 3x2,5 m. Labyrinth - a three-dimensional structure with dimensions in terms of 12x7,2 m from welded metal rods; The well is a monolithic reinforced concrete structure 200 mm thick in the form of a pipe with an inner diameter of 3 m and a height of 6,05 m, placed inside a spiral staircase. The cable collector is a structure elongated in the form of a broken line 6,5 m long, made of standard prefabricated reinforced concrete trays located at an angle of 30-40 degrees to each other. Swinging ladder - a platform suspended on chains measuring 1,5x4 m with a height of 60 m from the ground level, placed on monolithic reinforced concrete. pillars at a height of 1 mot of ground level.

Structural and space-planning solutions.

Estimated groundwater level at abs. elev. 174,30. Fire station. The level of responsibility is normal, the class is KS-2. For conditional elev. 0,000 the level of the finished floor of the first floor is taken, which corresponds to abs. elev. 179,80. Structural scheme - frame-wall of monolithic reinforced concrete, maximum span 6,0 m. Monolithic reinforced concrete structures are made of concrete of class B30, grade W6 (underground part), reinforcement of classes A500C, A240. Waterproofing - painting. Foundations, bottom at el. minus 3,800 and minus 4,800 (abs. elev. 176,00 and 175,00 respectively), for concrete preparation from concrete of class B7,5 with a thickness of 100 mm: columnar with a slab part with a thickness of 300 mm to 900 mm; tape with a plate part 300 mm thick. Under the foundations lies grayish-brown, silty, heavy loam (IGE-2, E=15,3 MPa). Floor slab on the ground - variable thickness from 300 mm to 550 mm. External and internal walls of the underground part, including the walls of staircases, 200 mm thick, external insulated to the freezing depth. Columns (with a maximum step of 6x6 m): underground part - with a section of 500x500 mm, 600x600 mm; the above-ground part - with a section of 500x500 mm, 400x400 mm. The internal walls of the above-ground part, including the walls of the stairwells - 200 mm thick. External walls of the above-ground part: aerated concrete blocks (density 600 kg / m3), 200 mm thick, with insulation and cladding with metal cassettes; monolithic reinforced concrete 200 mm thick with insulation and lining with metal cassettes. Fastening of metal cassettes is provided for monolithic reinforced concrete structures. Ceilings and roofing - slabs 200 mm and 220 mm thick, with beams (section from 200x550(h) mm to 500x1400(h) mm) in separate sections. The roof slab provides for the installation of a prefabricated communication mast with guy wires. Stair flights and platforms from monolithic reinforced concrete. Educational and training projectile "Tower with a climbing wall" Elev. 0,000 corresponds to abs. elev. 180,30. The level of responsibility is normal, the class is KS-2. Structural scheme - cross-wall of monolithic reinforced concrete. Monolithic reinforced concrete structures are made of concrete of class B30, grade W6 (underground part), reinforcement of classes A500C, A240. The foundation is pile. Piles (hanging) - 350 mm in diameter, 9,0 m long. Under the end of the piles lies semi-solid loam (EGE-4, E=21,5 MPa). Grillage - tape section 500x600 (h) mm, bottom at elev. minus 0,800 (abs. elev. 179,50), for concrete preparation from concrete of class B7,5 with a thickness of 100 mm. Waterproofing - painting. External walls - monolithic reinforced concrete 200 mm thick with insulation and a certified facade system. Internal walls - 200 mm thick. Ceilings, covering (span up to 5,6 m) - slabs 200 mm thick. Stair flights and platforms from monolithic reinforced concrete. Rescuer psychological training lanes (firing lane), including a ladder above the pit, a flyover, a basement, a labyrinth, a well, a cable collector, a swinging ladder. The ladder above the pit is a steel frame made of rolled profiles (S245 steel). The ladder is located above a monolithic reinforced concrete (concrete class B25, grades W6 and F150) pit with dimensions in terms of 6,4x3,2 m and a depth of 1,8 m, a thickness of 200 mm (walls and bottom). A thickening of up to 400 mm is provided in the zone of rubbing off the steel racks of the ladder in the walls of the pit. In some areas, the ladder rests on monolithic reinforced concrete (concrete class B25, grades Wb and F150) columnar foundations, with a depth of 1,8 m from the ground. Waterproofing - pasting. Overpass - a steel (S245 steel) frame made of rolled sections with 2 platforms at different levels, on monolithic reinforced concrete (class B25 concrete, grades Wb and F150) columnar foundations, with a depth of 1,8 m from the ground surface. Waterproofing - pasting. Basement (underground with a depth of 3,2 mot of the earth's surface) - from monolithic reinforced concrete (concrete class B25, grades W8 and F150) 200 mm thick (bottom and walls). Waterproofing - pasting. Labyrinth (three-dimensional structure with plan dimensions of 12x7,2 m) - from steel lattice sections (height 3,0 from the ground) on monolithic reinforced concrete (concrete class B25, grades W8 and F150) strip foundations, with a depth of 1,8 m from the surface of the earth. Well (underground) - from monolithic reinforced concrete (concrete class B25, grades W8 and F150) with a thickness of 250 mm (bottom) and 200 mm (walls and coating). Waterproofing - pasting. Swinging ladder - a platform suspended on chains on monolithic reinforced concrete (class B25 concrete, grades W8 and F150) strip foundations, with a depth of 1,8 m from the ground. The foundation for the sewage pumping station is a slab of monolithic reinforced concrete (concrete class B30, grades W8 and F150) 400 mm thick at the bottom at elev. MINUS 9,3 M. The foundation for the DGU is a slab of monolithic reinforced concrete (concrete class B30, grades Wb and F150) 300 mm thick on a sand and gravel pad. Cable collector - prefabricated prefabricated reinforced concrete for sand bedding with a capacity of up to 1,8 m. Fencing of the territory (height 1,99 m) of prefabricated metal structures on columnar monolithic reinforced concrete (concrete class B15) foundations, with a depth of at least 1,6 m of the earth's surface. The retaining wall (on a relief difference up to 2,12 m high) is made of monolithic reinforced concrete (concrete class B30, grades Wb and F150) of an angle type with stiffeners. The impassable channel of the heating main is made of monolithic reinforced concrete (concrete class B22,5, grades W4 and F150) with a thickness of 200 mm (walls) and 250 mm (bottom), coated with precast concrete slabs.