Architectural and space-planning solutions:
The project documentation provides for the construction of a warehouse complex (production and logistics complex), which includes the following buildings and structures:

1. Block of warehouses, consisting of 4 modules with 4 sections each;
2. Administrative building;
3. Engineering and technical building;
4. Production buildings (2 pcs.);
5. Boiler room;
6. Warehouse of operational and economic service;
7. Transformer substations;
8. Local treatment facilities;
9. Checkpoints;
10. Recreation areas
11. Parking lots and technological platforms

The construction of the facility is divided into engineering preparation of the territory and three stages of construction. The structure of the 1st stage includes the following buildings and structures:

1. 4th module of the Block of warehouses
2. Engineering and technical building
3. Complete transformer substation No. 1.
4. The building of the checkpoint No. 1 and No. 2.
5. Gas boiler.
6. Chimney
7. Warehouse of operational and economic service.
8. Local treatment facilities
9. Rainwater equalization tank
10. Trestle for engineering networks No. 1
11. Technological platforms at module No. 4 of the Block of warehouses.
12. Outdoor car parking for 60 vehicles
13. Outdoor car parking for 30 vehicles
14. Rest area for workers
15. Bus stop
16. Sites for garbage containers
17. Factory area fencing

The structure of the 2nd stage includes the following buildings and structures:

1. 1, 2, 3 modules of the Block of warehouses
2. Outdoor car parking for 31 vehicles
3. Open parking for trucks for 32 vehicles
4. Technological platforms at modules No. 1,2,3 of the Block of warehouses.
5. Checkpoint Building No. 3
6. Complete transformer substation No. 2
7. Sites for garbage containers

The structure of the 3nd stage includes the following buildings and structures:

1. Administrative building.
2. Production buildings No. 1 and No. 2
3. Sites for the installation of garbage containers.
4. Checkpoint Building No. 4
5. Volleyball court (basketball)
6. Rest area for workers
7. Outdoor car parking for 16 vehicles
8. Open car parking for 20 and 31 vehicles
9. Trestle for engineering networks No. 2

The block of warehouses consists of four identical interlocked warehouse modules - No. 1, No. 2, No. 3, No. 4. Each module consists of 4 identical warehouse sections, which are separate structural units, which include the necessary administrative and technical premises. For a relative mark of 0.000, the mark of the finished floor of the 1st floor of the building is taken, corresponding to the absolute mark of +11,90 in the Baltic height system. The building is designed with overall dimensions in terms of 386x114 m and a height from ground level to the top of the parapet 15,600 m. The storage module has dimensions of 114x96 m. Each module is divided into 4 identical warehouse sections with dimensions of 57x48 m. The height of the warehouse part is 10,72 m. The floor height of administrative and amenity premises is 3,3 m. The warehouse section includes a warehouse area, one-storey with plan dimensions of 48x48m and a 4-storey building, which houses technical and administrative premises, including masters' rooms, bathrooms, dressing rooms with showers, security rooms, ventilation chambers, ITP and switchboard. The building has staircases spaced along the edges of the section and separate exits. The facades of the building are designed from sandwich panels with a polymer coating. Internal partitions made of aerated concrete, GKL and GKVL on a metal frame, with finishing depending on the purpose of the premises. Window filling - metal-plastic double-glazed windows. The roofing of the block of warehouses is designed as a roll roof with an internal heated drain. The cover is flat. Access to the roof is carried out from the volumes of stairwells. The building of the engineering and technical complex consists of two functional blocks - administrative and amenity and a garage for special equipment, connected at an angle of 20 °. For a relative mark of 0.000, the mark of the finished floor of the 1st floor of the building was taken, corresponding to the absolute mark of +11,46 in the Baltic height system. The height of the building from the planning mark of the earth to the parapet of the administrative and amenity block is 12,5 m; special equipment garage 9,16 m. The administrative and amenity block is designed as a 3-story block, the height of the 1st floor is 3,34 m, the height of 2-3 floors is 3,4 m. On the ground floor there are premises of a specialist in the system of internal and external monitoring and control, a dispatcher, on-duty plumbers and electricians, sanitary facilities. In the central part of the first floor there is a dining room for 25 people with a separate entrance. On the second floor there are premises of specialists in the maintenance of the warehouse complex and sanitary facilities. On the third floor there are offices for the administration of the complex. Access to the second and third floors is via 2 stairwells. The garage for special equipment is designed as a one-story garage, the height to the bottom of the protruding structures is 5,16 m. It provides a parking space for cleaning vehicles with 2 entrances equipped with overhead sectional doors, a pantry for outdoor cleaning of the territory, a material warehouse with storage of spare parts, a central water metering unit, and a heat point. The facades of the building are designed from sandwich panels with a polymer coating. Internal partitions made of silicate wall hollow blocks, aerated concrete, gypsum plasterboard and gypsum plasterboard on a metal frame, with finishing depending on the purpose of the premises. Window filling - metal-plastic double-glazed windows. The roof is designed rolled with an internal heated drain. The cover is flat. Exit to the roof is carried out from the volumes of staircases and an external fire escape. Checkpoint. On the territory of the warehouse complex, 4 checkpoints (checkpoints) have been designed at the main entrances and exits. The functional purpose of the facility is to control the movement and inspection of freight and passenger vehicles; control of the passage of people to the territory of the warehouse complex. For the relative mark of 0.000, the mark of the top of the reinforced concrete base slab was taken, corresponding to the absolute marks of +11,35; +11,25; +11,05 in the Baltic height system. The building is one-story, with dimensions in the extreme axes of 7,90 x 3,40 m. The height of the premises is 2,7 m, and the height is 4,0 m from the planning mark of the ground to the parapet. The building consists of three rooms - a checkpoint with turnstiles; waiting areas for visitors; security premises. The entrance to the checkpoint is equipped with a canopy in the form of a three-dimensional visor. The facades of the building are designed from sandwich panels with a polymer coating. Internal partitions made of aerated concrete, plasterboard on a metal frame, with finishing depending on the purpose of the premises. Window filling - metal-plastic single-chamber double-glazed windows. The roof is designed rolled with an external organized drain. The cover is flat. Warehouse of operational and economic service. On the territory of the warehouse complex (production and logistics complex), a warehouse building for the operational and economic service was designed. The building is one-story. For the relative mark of 0.000, the mark of the finished floor of the floor of the building is taken, corresponding to the absolute mark of +11,90 in the Baltic height system. The height of the building is 12,15 m from the ground elevation to the parapet. The building has an administrative area. Administrative and amenity area 4 meters high. It houses a security room and a storekeeper, utility rooms, engineering and technical rooms. The storage area provides for the storage of goods on racks. The height of the warehouse to the bottom of the protruding structures is 8,55 m. The facades of the building are designed from sandwich panels with a polymer coating. Internal partitions made of aerated concrete, gypsum plasterboard and gypsum plasterboard on a metal frame, with finishing depending on the purpose of the premises. Window filling - metal-plastic single-chamber double-glazed windows. The roof is designed rolled with an external organized drain. The cover is flat. Industrial building. On the territory of the warehouse facility (production and logistics complex), 2 production buildings are designed. The production buildings are identical. Technological platforms for loading materials are provided along the main facades. Each production building consists of a one-story production and storage area 7,42 m high and a 4-story building, which houses technical and administrative premises, including an expedition area (9x24 m), a charging station for traction batteries for electric forklifts and electric stackers, rooms masters, bathrooms, dressing rooms with showers, security rooms, ventilation chambers, ITP and switchboard. The height of each floor of the administrative building is 3,3 m. The building has staircases spaced along the edges of the section and separate exits. For a relative mark of 0.000, the mark of the finished floor of the 1st floor of the building was taken, corresponding to the absolute mark of +10,56 in the Baltic height system. The building is designed with overall dimensions in terms of 69x48 m and a height from the planning mark of the ground to the top of the parapet 12,00 m. The facades of the building are designed from sandwich panels with a polymer coating. Internal partitions made of aerated concrete, GKL and GKVL on a metal frame, with finishing depending on the purpose of the premises. Window filling - metal-plastic double-glazed windows. The roof of the production building is designed as a flat rolled roof with an internal heated drain. The cover is flat. Access to the roof is carried out from the volumes of stairwells. Administrative building. An administrative building has been designed on the territory of the warehouse facility (production and logistics complex). The L-shaped building consists of two parts - an administrative block and a canteen block adjoining it at an angle of 90 ° with accompanying premises. For a relative mark of 0.000, the mark of the finished floor of the 1st floor of the building is taken, corresponding to the absolute mark of +11,26 in the Baltic height system. One-story dining block. It consists of a dining room for 48 seats and service rooms, including a loading room, food preparation workshops, sanitary facilities, and engineering facilities. The dining room has separate exits. The administrative block is six-story, the height from the planning mark of the ground to the top of the parapet is 25,87 meters, the height of the floors is 3,6-3,9 m. On the first floor (floor height 3,9 m) there are: administration offices, security rooms with a checkpoint, utility rooms, engineering and technical rooms ...