The project documentation provides for the construction of a cemetery. The territory of the cemetery is divided into functional zones: entrance zone, parking lots, administrative and economic zone, burial places, green protection.

Architectural and space planning solutions

The administrative and economic zone of the projected cemetery includes the following objects: an administrative building, an industrial building and a garage with a shed for 5 pieces of equipment. Administrative and amenity building: The designed administrative and amenity building (hereinafter ABA) is a separate building, complex in plan, with dimensions in the extreme axes of 35,20 x 23,96 m. The ABA is designed to provide a full range of ritual services and services to the population. The building is one-story without a basement. The maximum height of the building from the planning level of the ground to the top of the parapet is 4,75 m. The main entrance to the building is designed with a porch with two symmetrically located ramps for the access of a low-mobility group of the population (hereinafter referred to as MGN). The building is designed with emergency exits directly outside on 4 porches, 2 of which are equipped with ramps. For a relative mark of 0,000, the level of the finished floor of the first floor is taken. On the ground floor of the building are designed: a hall, a cloakroom, a security room and bathrooms for visitors, a universal bathroom for MGN and a bathroom for visitors to the cemetery with a separate entrance from the street along a ramp, a funeral goods store with orders, a store selling flower products, a room for store employees ; administrative and service premises, including the director's office and reception room, the chief engineer's office, the chief accountant's office and accounting rooms, the storage room for archival documents, the premises of the burial master and the installation worker, the site mechanic's room, a pantry of cleaning equipment was designed; amenity premises, including the premises of the first-aid post, the dining room for staff, bathrooms for staff; technical rooms (electric panel, water meter unit, ventilation chamber). The height of the premises on the first floor is 3,20 m (from the floor to the bottom of the floor slabs), the height of the premises from the floor to the bottom of the suspended ceiling is 2,70 m. The roof is flat, with an organized external drain, with electric heating of the drainage system. Roof - from rolled materials. Access to the roof is provided by two vertical metal stairs. A metal fence along the parapet is partially provided. The outer walls are made of porous stone and solid ceramic bricks. The basement of the outer walls is made of solid brick with insulation. The internal walls and partitions are plastered from solid bricks. Filling of window openings - window structures made of PVC profile with double-glazed windows with fanlight opening, with external metal bars opening from the inside. Doors internal - metal, fire-prevention, wooden. External doors - metal insulated and glazed with reinforced glass. Finishing of the facades of the building: basement - finishing with porcelain stoneware; above-ground floor - decorative smooth plaster and porcelain stoneware finishing; Entrances to the building are provided with metal canopies made of galvanized sheet profile. The interior decoration is provided taking into account the functional purpose of the premises from materials that have hygienic and fire certificates. Floor finishing: from ceramic tiles (entrance vestibules, bathrooms, storerooms for cleaning equipment, a hall, a wardrobe, a funeral goods store with orders for 20 visitors, a flower shop, a pantry room); from linoleum (service premises); from piece parquet (premises of the directorate and Ch. accountant); cement-sand (technical rooms). Finishing walls, partitions: cement-sand plaster, water-based paint; glazed ceramic tiles; Ceiling finishes: suspended, Armstrong type and slatted metal; plaster painting. Production and amenity building: Designed industrial and amenity building (hereinafter referred to as PBK) is a separate building, complex in plan, with maximum dimensions in the extreme axes of 39,415 x 14,300 m. the process of a full range of ritual services to the population. The building is one-story without a basement. The maximum height of the building from the planning ground level to the top of the parapet is 4,75 m. A platform with a canopy for storing ritual items (monuments, shells, crosses) with overall dimensions of 8,0x10,40 m is designed near the western outer wall of the building. The maximum height of the canopy along the ridge from the planning level of the ground is 4,83 m. The entrances to the building are decorated with porches. The building is designed with emergency exits directly outside. From the utility room there is an exit along the ramp to the outdoor platform with a canopy. The canopy is designed according to metal structures and metal racks. For a relative mark of 0,000, the level of the finished floor of the first floor of the PBK was taken. On the ground floor of the building are designed: a vestibule, recreation, corridors, service rooms and utility rooms, including a utility room with a separate exit to the outside); amenity premises: a dining room for staff, bathrooms for staff, wardrobes and showers, a pantry for overalls, a room for drying clothes, a heating room for diggers; technical premises: electrical panel room, ventilation chamber room with a separate exit to the outside. The height of the premises on the first floor is 3,20 m (from the floor to the bottom of the floor slabs), the height of the premises from the floor to the bottom of the suspended ceiling is 2,70 m. The roof is flat, with an organized external drain, with electric heating of the drainage system. The roof of the building is made of rolled materials. Access to the roof is provided by a vertical metal ladder P1-1. A metal fence along the parapet is partially provided. The cover of the canopy is pitched, with an unorganized external drain. The roof of the canopy is made of profiled metal sheets. The outer walls are made of porous stone and solid ceramic bricks with a total thickness of 640 mm. The basement of the outer walls is made of solid brick with insulation. The internal walls and partitions are plastered from solid bricks. Filling of window openings - window structures made of PVC profile with double-glazed windows with fanlight opening, with removable external metal bars. Doors internal - metal, fire-prevention, wooden. Doors external - metal warmed. Finishing of the facades of the building: basement - from porcelain stoneware; above-ground floor - decorative plaster of different textures; Entrances to the building are provided with metal canopies made of galvanized sheet profile. The interior decoration is provided taking into account the functional purpose of the premises from materials that have hygienic and fire certificates. Floor finishing: from ceramic tiles (entrance vestibules, bathrooms, showers, wardrobes, utility rooms, clothes drying room, workwear pantry); from linoleum (driver's room, foreman's room and caretaker's room, food intake room); cement-sand (ventilation chamber, electrical panel, heating room); asphalt concrete on crushed stone (a platform with a canopy for storing ritual products). Finishing walls, partitions: cement-sand plaster, water-based paint, glazed ceramic tiles; Ceilings finishing: suspended from plasterboard and rack metal, painting on plaster. , Garage with a canopy for 5 vehicles: The designed garage building with a canopy for 5 vehicles is a separate building, rectangular in plan, with dimensions in the extreme axes of 15,14 x 6,84 m. At the western outer wall of the building, an open area with dimensions in the extreme axes of 13,0 x 4,9 m is designed, intended only for storage (parking) of cars for 5 places: 3 places for cars, 1 place for a wheeled tractor and 1 place for utility - cleaning machine. A canopy was designed over the site from metal structures on metal racks. The maximum height of the canopy along the ridge from the planning ground level is 4,22 m. The garage building is intended for maintenance and storage of vehicles for the needs of the cemetery. The building is one-story without a basement. The maximum height of the building from the planning ground level to the top of the parapet is 4,75 m. The building is designed with emergency exits directly outside. For a relative mark of 0,000, the level of the finished floor of the first floor is taken. On the ground floor of the building are designed: a vestibule, a corridor, an administrative room, a technical room, a utility room, a staff room, a bathroom, a shower room, a parking lot for 2 cars / places for cars, separated from the rest of the rooms by a vestibule-gateway, and a separate exit to the outside through swing doors. metal gates (2 pcs.) along the outer ramp. The height of the premises on the first floor is 3,20 m (from the floor to the bottom of the floor slabs), the height of the premises from the floor to the bottom of the suspended ceiling is 2,70 m. The roof is flat, with an organized external drain, with electric heating of the drainage system. Roof - from rolled materials. Access to the roof is provided by a vertical metal ladder P1-1. A metal fence along the parapet is partially provided. The cover of the canopy is pitched, with an unorganized external drain.