General information.

The project for the construction of a pig farm provides for: year-round uniform production, rearing and fattening of 3768 pigs per year, construction of a complex of pavilion-type buildings; maintenance of all age groups of sows, weaned piglets, replacement and fattening young animals - floor feeding of all age and sex groups of animals with dry feed mixtures; , distribution of feed by stationary installations through pipelines; removal of manure using a self-floating manure removal network; processing of manure waste to produce solid and liquid fractions of manure, slaughter and disposal of sick and discarded animals in a slaughterhouse with a cremator shed. The building is one-story, consisting of a reproduction building with a gable roof, with main dimensions (along the axes of the building) in plan 12,0 m x 99,0 m, with a room height (to the bottom of the supporting structures) 3,0 m; feeding buildings with a gable roof with the main dimensions (along the axes of the building) in plan 12,0 m x 90,0 m, with a room height (to the bottom of the load-bearing structures) of 3,0 m and a connecting gallery with the administrative building with a gable roof, with the main dimensions (along the axes building) in plan 9,0m x 16,0m, with a room height (to the bottom of the supporting structures) 2,5m. The planning solution for these buildings was made in accordance with the technological diagram. The foundations are columnar monolithic reinforced concrete. The load-bearing frame of the building is metal columns and trusses, connections along them. External enclosing structures are three-layer metal sandwich panels with polyurethane foam insulation, 60 mm thick. The plinth is a three-layer reinforced concrete plinth panel with insulation extruded polystyrene foam "Penoplex", type 35, thickness 80mm. The roof is a single-pitch roof made of three-layer metal sandwich panels with polyurethane foam insulation, 80 mm thick. The roof of the auxiliary premises block is single-pitched and made of profiled metal sheet GOST 24045-94. Floors – floor pies provided. Partitions - double moisture-resistant plasterboard on a single metal frame filled with mini-slab - thickness 110 mm, thickness 200 mm, cross-section of the metal frame profile 100x50 mm, strut spacing 300 mm, height 3,1 m. Partitions are connected to load-bearing walls, and with a length of more than 3,0 m - with overlaps. The frame of plasterboard partitions is attached to the main floor and to the ceiling. To ensure independent deformation of the partitions, anti-seismic seams are provided along the vertical end and upper horizontal edges of the partitions and the load-bearing structures of the building. The width of the seams is 20 mm. The seams are filled with elastic elastic material. The partitions are fastened to the supporting structures using connecting elements and anchor bolts. Type 1 fire partition for categorized premises - sandwich panel partition with mineral wool insulation. To protect against rodents, the lower sections of the walls and partitions are tightly covered on both sides with galvanized metal mesh with 4x4mm cells to a height of 30cm.