Space-planning and architectural solutions.

The project provides for the construction of a frameless arched hangar. The projected building is one-storey rectangular in plan, without a basement. Designed in axes A-B/1-2, dimensions 18x42m, has a height of 9,000 m to the bottom of the structure. The following characteristics of the building were adopted during the design: Structural fire hazard class - C0. The degree of fire resistance of the building - IV. Functional fire hazard class of the building - F 5.2 Humidity regime - normal. The building is heated, temperature regime: warehouse +16 °C. For a relative mark of 0,000, take the level of the clean floor of the building.

Walling.

The building is frameless insulated. The outer walls of the building in axes 1-2, 2-1 are made of: hot-dip galvanized steel sheet profile according to GOST R 52246-2016, for the construction of prefabricated arched structures in accordance with TU 52 7200-028-87168171-2012, fire resistance limit of the building's load-bearing elements R15, RE15 coating elements; the bearing ribs of the arched structure of the building are protected by a heater made of rigid mineral wool boards in two layers 150mm and 40mm thick; awning cover. External walls in axes A-B, B-A are made of facing with three-layer sandwich panels with thermal insulation of fire-resistant mineral wool, 100 mm thick, factory-ready, fire resistance of wall panels is EI 30. Internal partitions are made of three-layer sandwich panels with thermal insulation of fire-resistant mineral wool, 100 mm thick, fire resistance of wall panels EI 30. The ceiling of the interior is made of three-layer sandwich panels with thermal insulation from fire-resistant mineral wool, 100 mm thick. The entrance to the warehouse is equipped with 30 automatic sectional doors with a vertical lift and a thermal curtain measuring 50x2m. The gates have built-in gates 4,2x4,5m. Gates are mounted on a metal frame in axes A-B and B-A. The fastening of the gate elements should be carried out according to the units and developments of specialized companies that have certificates of conformity with the quality of their products, as well as compliance with other regulatory requirements of the Russian Federation. Installation of the window block LSKOS PR-S GOST 2,0 should be carried out in accordance with GOST R 0,915-30674. All building and finishing materials must have certificates of conformity or quality passports.