Architectural solutions.

The building is two-storey, rectangular in plan. The first floor is the stable building, the second floor - rooms for individual locker rooms for those involved. Functionally, the building is subject to the requirements of the stable building organization technology: on the first floor - the size in the axes is 39.2x9.2 m - there is a stable room, in which a separate partition separates stalls for horses, a washing room, a solarium, a feed room, where food is prepared for animals, a warehouse for storing a day's supply of feed and bedding, a room for an autonomous heating point and an electrical panel room. Hand on the second floor - the size in the axes is 32x12,2 m - there are rooms for individual locker rooms for trainees, groom's quarters, balcony. Access to the second floor is along the outer staircase, which has a separate entrance, not connected with the premises of the first floors. The roof over the premises of the first floor in the axes 1/1-1 - A-D and 9-9/1 - A-G - single-pitched, in the axes 1-9 - A'-G' - of complex shape - gable with a tie-in of gable roofs in the axes A'-B. Roof insulated.

Constructive decisions.

Foundation - for log walls, a strip foundation on a sand cushion of 200 mm is adopted. The strip foundation is buried by 1.3 m relative to the ground level. Foundation reinforcement adopted by reinforcement made of composite materials d = 12 mm, reinforcement spacing 250 mm. Concrete B22.5, F150 W8 The floor of the first floor is made on the ground: a concrete slab made of concrete B22.5 B22.5, F150 W8 with reinforcement from composite materials d=12 mm, reinforcement spacing 250 mm. The concrete is placed on Penoplex 100 mm thick and sand bedding 100 mm. The walls in axes 1-9 are made of wooden logs with a diameter of 220 mm, assembled in two-storey shed. Extensions in axes 1/1-1 and 9-9/1 are made of a wooden frame from a board 50x150 mm with mineral wool insulation. Room 20 (autonomous point heat supply) inside lined with bricks 120 mm thick, to ensure fire protection protection. The ceiling of the first floor is made of wooden beams with a section of 50x150 mm with a pitch of 640 mm. The rafter system is made of wooden beams with a section of 50x200 mm. For the manufacture of roof elements, use softwood lumber 1 varieties with a moisture content of not more than 20% that meet the requirements of GOST 8486-86*. Annual Width layers in wood should be no more than 5 mm, the content of late wood in them Protection of wood from decay and fire protection to be carried out in accordance with the requirements of the joint venture 28.13330.2012. Process all wooden structures of the log house, ceilings, partitions and roofs fire-retardant biopyrene "Kedr ANB(SCH)" (or analogues), TU 2149-003-71487193, by applying onto the surface with a brush. Consumption of biopyrene 100 g per 1 m2 of surface.