Architectural solutions

The designed outlines of the building are dictated by urban planning, fire and sanitary standards. The exhibition complex is designed for the sale and storage of used cars. The building provides the necessary groups of rooms for a comfortable stay of visitors and staff (washrooms, meeting rooms), as well as rooms for manual car washing. The object has built-in technical rooms - on the 1st floor there is an electrical panel and a sprinkler room with pressure boosting installations and special equipment. firefighting. The roof is flat, unexploited with a ventilation chamber. Main parameters. Dimensions of the building in terms of 41,2m x 32,40m Number of floors: 2 Maximum height of the building from the planning mark. ground - 14,000 m, Height of the 1st floor from the finished floor to the floor slab - 4,470 m. mark + 2. Ground floor: On the ground floor there are technical rooms, car lift, customer service center, offices, bathrooms. Technical premises include electrical panel, sprinkler room, manual sinks for 3,720 posts. The technical premises are separated from the business area by a fire wall made of the Stroypanel sandwich panel, which divides the 0,000st floor into two fire compartments. Second floor: On the second floor there is an exhibition hall, a server room, executive offices. On the roof there are ventilation chambers and exits to the roof from the volumes of stairwells. Roof. The roof is soft, flat, unexploited. On the roof there is a ventilation chamber, an elevator shaft. Access to the roof is from the staircase. The roof is protected by a parapet of sandwich panels. The architectural appearance of the building consists of a combination of deaf and glazed parts of the facades. Enclosing structures of the building - sandwich panels "Stroypanel". A metal flashing is installed on the mounting seams in the color of the panels. The plinth is tiled with ceramic granite tiles. The glazed parts of the building are stained-glass windows with 1 mm thick glass and an energy-saving coating on aluminum alloy substructures.

Structural and space-planning solutions

The foundations are taken from driven piles with dimensions of 0,4x.4x16m with a tape monolithic grillage. The frame of the building is a monolithic columns connected with floor and roof disks. The spatial rigidity and stability of the building is ensured by the joint work of the system of columns, stiffening diaphragms, ties along the coating and the floor disk. The pitch of the columns is 6x7m, and in the canopy area 6x12m. Loads from the walls of staircases and elevators are also taken by piles. The enclosing structure is made of hinged sandwich panels. Material of grillages and floor slabs: concrete class B25, W6, F100; fittings class A500C. Material of columns, walls, elevator shafts, stairs, beams and floors: concrete class B25, W6, F100; fittings class A500C. The flight of stairs is monolithic, the evacuation staircase is metal. In the area of ​​the customer service center there is a technological ladder on metal stringers for lifting from the first floor to the second. The building responsibility class is ΙΙ.

Technological scheme of the object functioning

The planning decision was made taking into account the zoning of the premises in accordance with their functional and technological purpose. Cars of customers are sent under their own power with the engine running to the manual washing stations located at elevation 0.000 in the car wash rooms, where cleaning and washing operations are organized. Cars enter the production area of ​​the auto center under their own power with previously drained fuel up to the amount of fuel not exceeding 1 kg in the car tank, sufficient to perform independent maneuvers. Manual washing is carried out using high-pressure washers without heating water, which provide the required quality of car body cleaning by hand. Cleaning of car interiors is carried out with the help of washing vacuum cleaners. Metal cabinets are provided for storage of detergents and washing equipment. To provide the production area with equipment, consumables and tools, as well as the operational needs of the building, the project provides for a pantry for additional equipment, pantries for storing lamps and means for servicing lamps, pantries for cleaning equipment. Storage of goods is carried out on shelf racks 2 m high with manual stacking. Used cars intended for sale enter the exhibition complex building being designed from the service area of ​​the adjacent existing building of the Customer's site. Cars enter the exhibition area of ​​the building with a previously drained fuel tank. The movement of cars is carried out manually, without a running engine. A car lift is provided for lifting cars to the 2nd floor. The exhibition hall houses a demonstration exposition of passenger cars, technical data on the cars sold are indicated on the information desks. For registration of cars for sale, various office premises are provided. After choosing a car by the buyer and completing the purchase documents, the car is manually moved to the first floor by the elevator, the transfer of the sold cars to the buyer is carried out in the car delivery room. Maintenance of cars on the territory of the exhibition complex is not provided. The height of the premises meets the technological requirements for ensuring the performance of work with cars. The technological equipment adopted in the project complies with the safety requirements of regulatory documents. States. The number of employees is accepted on the instructions of the Customer. The total number of employees is 35 people. The number of personnel in the maximum shift is 20 people.